2019 GEHL RS5-19 GEN 3 New

8 months ago Heavy Equipment Sherbrooke, Quebec   96 views

Please Contact


Gehl RS5-19 Forklift

The RS5-19 GEN:3 is built to work hard.

Compact size 5' 11" wide & 6' 4" tall

Total weight of 10,000 lbs

With a ground clearance of 14"

Two section telescopic boom has full hydraulic power for all lift and telescopic functions

Hydraulic self-leveling lift action automatically keeps the load level as the boom is raised.

Inboard wet-disc service brakes

Limited slip differential is located on front axle.

Highly visible boom level indicator is located on the outer boom and an easy-to-read frame level gauge is located in the cab

System Pressure (bar) 3,350 psi (231)

Hydraulic System Total Capacity (L/min) 20 gpm (83)

Operator's Cabin

The operator’s cab in the RS5-19 GEN:3 Telescopic Handler is anything but compact. A modern, ergonomic design maximizes comfort.

High-back seat with right-side adjustable armrest; suspension seat optional.

Locking storage compartment under seat.

Full 360° visibility.

Ergonomic design features all gauges, indicator lights and switches on the right-side dash panel

ROPS/FOPS canopy standard; ROPS/FOPS cab with heater or ROPS/FOPS cab with heater & A/C optional


Gehl RS5-19 Telehandler Crab Steering

To enhance maneuverability, the RS5-19 Telescopic Handler has three steering modes. An operator can change between 2-wheel, 4-wheel and crab-type steering by flipping a switch in the operator’s station.


The RS5-19 GEN:3 Telescopic Handler has the power to get work done effectively and efficiently.

Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair.

Rexroth 2-speed hydrostatic transmission.

Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.

Manufacturer Yanmar

Model 4TNV98C Tier IV

Power (kW) 69 hp (50.1)

Maximum Travel Speed (km/hr) 15 mph (24)

Rated Speed 2,500 rpmGehl RS5-19 Engine Access


Gehl RS5-19 Telescopic Handler Hydraulics

The model RS5-19 GEN:3 makes no exceptions when it comes to hydraulic performance.

Pump Type Gear

Total Capacity (L/min) 20 gpm (83)

System Pressure (bar) 3,350 psi (231)

Hydraulic Reservoir Capacity (L) 18 gal. (68)


Gehl RS5-19 Crane Service Access

The RS5-19 GEN:3 Telescopic Handler has an intelligent design that protects components and provides easy access for routine maintenance.

The engine hood lifts fully out of the way, providing easy access to the battery and engine maintenance

A hinged access door provides easy access to the engine oil drain

Hydraulic oil fill cap is located on the top of the engine compartment for easier access, with a spill guard for extra protection

A protective sleeve over the exhaust pipe increases safety when working on the engine

A dual-element air filter protects the engine from airborne contaminants

Additional Details

Year 2019
Model RS5-19 GEN 3